Micro 100 CCR
The MCCR 100 is specifically designed for the efficient and effective supply of power to airfield ground lighting series circuits.
Compliance with Standards
FAA AC 150/5345-10F
Features
• Pre-programmed with default operating parameters suitable for most applications. Where necessary, changes can be made via the front panel keypad. An external PC is not necessary.
• Accurate control of RMS output current into all loads from short circuit to full rated output
• Multi-tapped output isolation transformer – tappings can be selected to match the load minimising the harmonic and increasing the efficiency
• Output circuit isolated from the mains supply
• Minimal cubicle footprint to reduce space requirements
• Air cooled – no fans required
• Low life cycle costs
• Compatible with circuit selector and lamp switching equipment
• Micro processor-controlled display allowing extensive CCR monitoring and diagnostic information to be presented to Engineers and Technicians. This can include:
– Output Current Value
– Brightness Step
– % of Maximum Output
– Alarm Text Description
– Number of Failed Lamps
– Hours Run Counter
– Insulation reading
– Power analysis.
Technical Specifications
Power Factor
At nominal resistive load, nominal output current and nominal input voltage:-
• Up to 0.9 for ratings up to 10 kVA
• Up to 0.95 for 12 kVA and greater
Efficiency
At nominal power into resistive load, maximum brilliancy and nominal input voltage:-
• 90% or better
Output Power Ratings
• At 380, 400, 415V:
Outputs of 2.5, 4.0, 5.0, 7.5, 10, 15, 20, 25, 30 kVA
• At 210, 220, 240V:
Outputs of 2.5, 4.0, 5.0, 7.5, 10, 12.5, 15 kVA
Output Current Ratings
• 6.0, 6.6, 12, 20A
Input Voltage Ratings
• 220, 230, 240 Volts Single Phase 50/60 Hz
380, 400, 415, 440 Volts 2 Phase, 50/60 Hz
Indostate Tradelinks 